a four pin firewire port, but my computer only comes in 6 pin. Does anyone know how I can connect my camcorder to computer some other way? Try 6 pin/4 pin FireWire 400, IEEE 1394a Cable Available HERE
...9 pin firewire cables. The camera uses a 4 pin cable. You require a 4 to 6 pin cable or 4 to 9 pin cable depending on the Mac. Firewire can aslo be called iLink or IEEE 1394a (6pin) IEEE 1394b
Question about Sony Handycam Video Cameras
...IEEE-1394a cable). The connector on your camcorder is a 4-pin connector. You will either have that same looking connector on your computer (some laptops now have the 4-pin connector) or a 6-pin ...
...IEEE-1394a cable). The connector on your camcorder is a 4-pin connector. You will either have that same looking connector on your computer (some laptops now have the 4-pin connector) or a 6-pin ...
...IEEE 1394A CABLE as suggested. The 4 circuit end fits my camcorder but the other six pin end does not fit into any of my laptops.My laptops are only two years old - HP and Acer. Most PCs have USB ...
...IEEE-1394 cards so be sure your card is compatible and you have all updates installed. Here's are some other areas to look at: - It is very possible that some other software on your system has ...
Question about Sony Handycam Video Cameras
...1394a device such as a scanner, a digital camera, or a digital camcorder. The Camcorder requires IEEE 1394 connection (Per the Sony manual: .LINK is a trademark of Sony used only to designate that a ...
IEEE 1394A) port. If you don't have one on your computer, then consider buying one. Most video editing software have a "Capture" mode, and work with all Firewire devices, without additional drivers or
...IEEE-1394a cable). The connector on your camcorder is a 4-pin connector. You will either have that same looking connector on your computer (some laptops now have the 4-pin connector) or a 6-pin ...
136 questions posted
Usually answered in minutes!
310 Questions
243 Questions
242 Questions
159 Questions
150 Questions