Mag Innovision LT982s 19" Flat Panel LCD Monitor "solder" Questions

...monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses, poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open

...monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses, poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open

Mag LT916a/900p monitor turns on and then goes black in less than a second. Sounds like the inverter is dying/died. Take a flashlight and shine it directly or at a large angle at the screen - is the ...

screen had multi-color vertical lines, then went black Is my monitor dead??? the monitor has power board issues it is not your video card. its not dead but it will require some soldering work to ...

THE MALE 15 P PLUG ON MY MAG LCD WAS CUT OFF. I BOUGHT A D-SUB CONNECTOR TO PUT BACK ON BUT DONT KNOW WHICK COLOR WIRE GETS SOLDER AT. here you go http://pinouts.ru/Video/VGA15_pinout.shtml

mag LT776s monitor goes black when i turn on the computer, it comes up like it regularly does, then it goes completely black. Hi this is the way how to examine what's wrong with your LCD monitors. ...

...a different size. If you can't find the plug at all, at worst you could open the monitor case and solder the end of a grounded wire, OR solder in a standard

Monitor goes black. After I've been using the computer/monitor for awhile, the monitor just goes black. I then have to power the monitor off and back on. This is happening more frequent all the time. ...

...fault in the filter circuitry may just need to be taken in for a service and pcb reflowed with solder. But caps will need to be

...monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses, poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open