...led alternet blinking. my lg flatron 775ft 17" inch white monitor The monitor is probably on protection. To start unplug monitor from power and from computer and test computer with different monitor ...
Question about LG Flatron Computers & Internet
...power led stays on but no picture, please help The inverter is faulty.If your Monitor is powered by a mains'kettle' type lead,then it MAY be repairable,provided you can find someone to do it.If you ...
power led stays on but no picture, please help t certainly seems like the monitor is not getting a signal. Did this happen after you changed something, or just on normal boot up? It could be the video
Question about LG Flatron Computers & Internet
...power and from computer and test computer with different monitor to find out if it is monitor or computer fault. If it is computer fault and no video signal , then test: Video cable. Video adapter on ...
...power and from computer and test computer with different monitor to find out if it is monitor or computer fault. If it is computer fault and no video signal , then test: Video cable. Video adapter on ...
Question about LG Flatron Computers & Internet
...led power is blink about 1 h. and just again when power off about 1h. i need schematics. thank. I'm going through the same thing with a Dell 1905FP - it has 3 bulging capacitors on the Power ...
Question about LG Flatron Computers & Internet
power led means that the start voltage was not working properly, if you are a trained tech you can repair this monitor, but if you are a simple user it's dangerous, there is high voltage inside. cause
Question about LG Flatron Computers & Internet
...LED flashes and i have to disconnect everything to get it to0 start up again as normal. Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, ...
...power putton pulsates, but no display image. I've rebooted my dell desktop several times...i've unplugged the monitor...but no change. it was working fine for the past 1 year....just prior to this ...
led is on and off then when you power up the computer press F8 key 5 to 6 times so you can see safe mode and other menu then enter in "Enable vga mode" then go to display property ->settings change
108 questions posted
Usually answered in minutes!
255 Questions
260 Questions
101 Questions
100 Questions
89 Questions