LG Flatron L1750S 17" LCD Monitor "scaler board" Questions

...scaler PCB is blown. Open the monitor, open metal cover, disconnect all cables coming between display and boards, take the chassis off the display. On back side of display you will see metal cover, ...

scaler board and flex-cables, at least those where you have color lines. These cables are glued with anisotropic compound and not such easy to fix, to make it right you shall heat junctions to certain

...scaler board and flexi-cables, at least those where you have color lines. These cables are glued with anisotropic compound and not such easy to fix, to make it right you shall heat junctions to ...

scaler board is blown. To fix it you need to disconnect the display from inverter and processor boards, detach the chassis. At back side of display where flat cable connects you will find metal cover,

...on the scaler PCB - it is located on the display itself under metal cover - that it the board where flat cable from processor PCB comes into. There's tiny chip fuse, check it and if bad replace

the monitor. Check for loose connectors that connect the scaler, power supply, and logic board. I doubt its a loose cable but you may get lucky. Most likely it is a bad solder joint in the logic board

...scaler board and flexi-cables, at least those where you have color lines. These cables are glued with anisotropic compound and not such easy to fix, to make it right you shall heat junctions to ...

...Capacitor on LC 03 Scaler Board 3139 123 5680.4 v1 wk 319.5 do you have a value for the surface mount component #5474 on the B side of this scaler board? BEAD 100MHz at 120ohms Part# ...