Sharp LL T19D1-H (Ivory) 19" LCD Monitor "need power supply led" Questions

need them to do a swapout for a refurbished unit from SHARP, IF???? they even have a swapout program. "so psu probably ok" Well, maybe yes, maybe no. Is this psu a little black box that lays on floor,

...power LED. Hi..there, You've got a busted backlight inverter... Need to replaced a new one... Acer AL1716 Blank screen & blinking green power LED? This trouble maybe power supply or inverter ...

...power LED blinks an orange color, and nothing displays on the monitor. hi, does the three lights blink only after u connect it to a display card??if yes then check if any of the connecter pins are ...

even a led flash I would suspect it needs to have electronic troubleshooting done in the power supply section to find and replace the defective components. Is it possible the capacitor is in backwards

power on led flashes but no screen Hello, You need to check on the cable that is connecting your computer and the monitor. Usually you encounter this problem when the monitor is not getting any signal

...need to replace the capacitors on the power supply board. 8 capacitors will need to be swapped out. Here is a link to a repair kit with the correct parts. ...

...need open the monitor , them look for the power supplu board and with a multimeter measure the out put you shoud have 12v and 5v , if some of this voltage is missing your problem is the power supply ...

...power supply, blown fuses, poor solder jopints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will ...

...power ON button should not flash orange regardless what you do. it should stay green. then orange. not orange to green to orange. try the monitor on another PC if you can fine one. the other thing is ...

power supply, blown fuses, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and