Hotpoint HSS25GFP Side by Side Refrigerator "foam inside freezer" Questions

...foam piece inside of a plastic "vent" (?) which is mounted on the top inside of the refrigerator. Should this be there? It should probably be removed. The fan in the freezer need to blow cold air ...

...inside front edge of the plastic freezer floor until I could reach my hand at the back of the freezer floor and wiggle it forward. Once I removed the freezer floor I removed the ice that built up ...

...4 inches from top 1 inche long crack) will this make the freezer lose coldness or cause problems? If this crack goes all the way inside the unit then plug it with a foam sealer to avoid energy

foam on the inside of the freezer with 2 part epoxy or "shoe goo" or e6000 (these are the toughest glues I have ever used) which is available at a hobby shop. Make sure you do a test with the foam and

...inside the freezer door, you might not be able to. Newer fridges have the components installed and then a liquid foam insulation is squirted into the door. Some freezer doors and no longer made to ...

...inside are wet. the air in frig/freezer is not dry like it should be / this could be caused by / several things . drain in freezer restricted . not a complete defrost cycle. / poor door seal/ or open ...

...inside of my freezer door to replace the wiring harness and water tubing. How do I do this without damaging any parts (there are no screws visible anywhere)? Kitchenaid KSC25FKSS00 IF it is possible ...

...inside of the ice tray has tan colored gunk on the ice and the bottom shelf of the freezer has a 1/2 in layer of ice. Is there a simple fix or is it better to get a new fridge? manually derfrost ...

...inside the freezer. As I said, this hole is block with foam and a plastic sheet and a metal tab(probably the defrost heater for the drain.) I am reluctant to drill out this hole since who knows what ...

...Inside the opening it looks like foam that has sank in and there's a dark oily looking substance on the foam. I'm not sure if the opening was always there or if the opening was closed and the foam ...