Acer AL1711 17" LCD Monitor "sleep button aceres" Questions

...Sleep, or Turn-off." If the Monitor have its own "settings;" just find them by the [button on the monitor], and do the same thing as above; but I'm sure the computer will take care of both. "I hope ...

...sleep mode every 3 seconds when ever i turn on the power? Press the MENU button, navigate with the arrow buttons to the OSD icon, from there navigate to the OSD Timeout icon, then change the timeout ...

sleep mode When power button is pushed monitor immediately goes into sleep mode (computer already checked and video output is ok) You need to try it on another PC, alos verify if the VGA cable is good

...button, it only stays on for one second then goes off. What is causing this? Either sleep timer is on or the refresh rate is set higher then the screen to handle or scheme is not set for laptop. you ...

...to come back on after it goes into sleep mode? Wiggle the mouse, tap a key on the keyboard, and if the computer still doesn't respond then press the power button on the computer (not the

...sleep mode.you can push the menu button nothing happens screen stays black. OPEN MONITOR , look inside the PC BOARD around the transformer area and look for a burnt solder or cold solder , re solder ...

...on again to repeat the problem - same every time. No manipulation of the menu buttons while on, sleeping or switched on while holding menu buttons down, has any effect! A separate monitor using ...

...up. Help...drivfing me crazy. Hey, Press a few buttons on the keyboard incase the computer is in sleep mode. If you still don't get picture at all, the issue is with the computer, please test the ...

...Button ---> Settings ---> Control Panel ---> Power Options) Under the "Power Schemes" tab you will find the dialogue "Turn off monitor:" and then your choice. The power option refers to the ...

...button. It doesn't respond. When I put the computer into sleep mode the off-on switch turns amber. Start it up and its back to the same problem. Any ideas? You'll need to have your power board ...