Acer AL1711 17" LCD Monitor "goes off" Questions

goes blank. green light stays on. To get it to work properly requires rebooting 2 to 3 times as well as sometimes having to turn it off and on several times over a 5 to 15 minute period. once it seems

...goes off i have an acer P205H lcd panel. when i turn it on the display comes only for 1-2 sec and it goes off when i re-insert the vga cable or unplug and plug the power cable again the same thing ...

on If you are using the pc and it goes off on its own its probably the power supply. If it goes off while nobody is using it then check windows power settings to make sure sleep mode is not kicking on

...goes off after three seconds of applying new settings with resolution chgs or refresh rate the monitor display is blank but the light is green. my acer al 1711 monitor goes off after three seconds of ...

...goes off in a seconds my acer al1`715 lcd monitor power on , then goes off in a seconds Hi: Unfortunately, that symptom usually is caused by a failure in the power supply board , that is internally ...

goes black and I have to turn the monitor off to cool it down, my other monitor does the same but its not as bad. I even swapped the monitors over to see if it made a difference to each pc, no change.

goes black. If I turn it off and on about 10 or 15 times it will stay on and work normal. As long as I don't turn it off it works OK. You probably have a few dodgy caps on the power board inside. It's

...off light goes out. I can get no response from it at all. The first time it happened was when I'd switched on my PC first thing on a morning and typed in the password and after about a minute the ...

...goes off.... ...the computer data to be shown comes on for a brief moment (literally about half a second) then disappears as the screen goes dead! The light remains at green for about 5 seconds then ...

...goes black and by multiple on and off once I get things operating it starts to work but there are days that it doesn't work and I just leave it off for the day there is an hardware issue in your lcd ...