Acer AL1912 19" LCD Monitor "settings" Questions

button. I also was playing in the bios configuration and set the Aperture to 64. I'v also set other settings in the bios and tried to set it back to it's original setting by reformatting the "C" drive

...how do i get rid of it You probably need to change the resolution setting in your computer display settings to a setting that is supported by the monitor. Your resolution setting right now is ...

width and height ratio how do I set the monitor setting to widescreen mode, so the width & height ratios are not distorted? You need to set your PC video output resolution to the native resolution

...TO SHOW SMALL BLOCKS OF MANY COLORS THUS SCRAMBLNG THE WHOLE SCREEN befor replacing,make sure settings in video output from video card are set for that monitor.If color quality is set too high ...

...not remove it. And I cannot get quadplex to come up. What can I do? Just go to into the dispaly settings and change the hertz rate to 60 that should fix that ... Hope that helps....... The

...quot; input not suppported" message, then the pc shuts down. i may have changed the resolution settings and now i don' t know the right ones. i will thank you very much if you would help me. ...

...I thinks your OSD Setting time set to high... Open on screen display on your monitor, go to OSD Settings and look for OSD hold time and setting to 10 seconds. If that doesn't work...reset to ...

...to see the remaining part of screen. Kindly help me with the problem. Hi. What is happening is the settings that you have set on your laptop are too high for the monitor to recognize. You will need ...

...aspect ratio? display setting from the desk top right click and select properties, then select the settings tab then change your screen resolution display ...

...to the refresh rate provided by the converter box...but you can experiment with the picture clock settings described on pages 9 and