Kenwood Dnx6190hd "test speakers multimeter" Questions

...multimeter to test each wire by connecting one end of the multimeter to a wire, and the other end of the multimeter to a ground. Find your constant 12 volt wire (12 volts present with the key off), ...

...test lights. If you go to the trunk check at the speakers write down the wire colors on both speakers then pull the door panels do the same that will give you left and right and of course front and ...

...speakers. Remove the harness from the back of the cd player. Now use a multimeter set to continuity test to probe the speaker wire at the harness and at the other end where the speaker is (with ...

...test checks for continuity or a path which current can flow through. It does so by 'BEEPING' when the leads are connected to both ends of a connecting wire. So start checking the wires by connecting ...

...speakers when it started cutting out. It didnt change anything You probably have a speaker wire that's shorting to ground. I'd get a multimeter and test the wires going to that speaker for impedance ...

...speakers earth use your diode test tone to find the earth wire fit terminal blocks for connecting or solder and use shrink tubing if your not sure get an engineer to do this for you it doesn't take ...