Power not on, power button blinks green power light, doesn't power up. Benq FP92W It sounds like you have a power supply problem and the safety shutdown has kicked in, the system will need to be ...
not connected " all the time till power led switches to Amber chances are monitor is ok and problem is with graphic card or cpu.Connect to Known working CPU and confirm that monitor is the problem. If
Question about BenQ FP Computers & Internet
...not, you may need spend for a Power supply board, to repair one. There are two boards usually found on an LCD monitor, one main board that controls the LCD screen, back light, inverter, controls and ...
...not the gcard and it appears that there is power getting to the benq is it broke or a technical fault?? thanks for anyhelp that you can give. Different faults here. First fault is no power, it is bad ...
Question about BenQ FP Computers & Internet
not power up. Switch LE... Benq 567s lcd monitor does not power up. Switch led blinks but goes dead. Tried replacing capacitor 450v 82uf with 400v 100 uf but did not work. please help. That cap is for
Question about BenQ FP Computers & Internet
...power on.I noticed it is not working even no signal message is not showing at the time of power on.But if i keeping the power on for one hour then the monitor working without any interrupt but if i ...
Question about BenQ FP Computers & Internet
not be much more than repair prices. One thing how ever- the power supply[which would appear to be the problem] is this built into the screen [that is does the screen have mains power direct? Or is it
Question about BenQ FP Computers & Internet
power button is now always on and does not go off on its own. I searched round for posts on the issue and a lot are saying there is some bad soldering on the board so I cracked it open and sure enough
power indicator is on, but there are not any signals on display, not responding on any of buttons on front panel either There are two places to look for the problems, the backlight inverter board and ...
...not power up. I have checked the obvious possible problems(bad power cord, loose connections,etc)Any suggestions? try to turn it on the power switch on monitor.....and make sure all connection are ...
67 questions posted
Usually answered in minutes!
111 Questions
116 Questions
62 Questions
37 Questions
36 Questions