Samsung SyncMaster 930B 19" LCD Flat Panel Monitor "power without" Questions

...power light on and off on its own without powering up This is probably normal IF you are interrupting the power externally. The processor in the monitor is just reseting itself before setting the ...

...without being connected to computer, like it has no power). Took a look inside the monitor but didnt see any broken/burnt components.had this monitor for 2 years and this is 1st time something like ...

...power on my monitor without data cable i got a message on screen CHECK SIGNAL CABLE.when i connect data cable my lcd is going to power off.please help? The message says that the monitor doesn't ...

...also change brightness without I touching it's buttons (need help) open case remove little plug from back of switches kepp it out close case ....fixed but no power light or buttons picture is fine ;

...without connection to PC video. If you get a no signal, you good to go . Reconnect. If you continue to get a flashing light on power button, Check warranty, get it back to Samsung for repair. Hope ...

...power outlets without success. If you get a flashing screen which show your screen for few minutes and then goes blank it may be an issue with the Monitor. Try to restart the computer and go to BIOS ...

...without having to press the monitor buttons, as it is constantly on my screen. thankss. unplug remove screws take out the little white plug from by switches ...put case back on leave the white plug ...

...power inposible to turn it on again without opening the back of monitorand throwing out the cable inside ;D help me plz How do the caps in the power supply look? Leaking/bulging tops? Most common ...

...power button for count of ten (did count of twenty just to make sure) didn't work. Menu came back up. Will try unplugging control chip next (this fix doesn't make sense to me ) will see if monitor ...

without being turned off. it powers on but turns off on its own after a few seconds It is possible that the TV was hit by a small power surge, and the processor has some garbage in it, and you need to