Magic Chef CYE2000 Electric Commercial Dryer "ignitor won start" Questions

Ad

...ignitor going bad... Here is a tip that I wrote about that problem... Gas Dryer not Working Gas Dryer Not Heating http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not If your ...

Ad

...ignitor glows but the gas valve won't re-open. Is there a high limit sensor? i read a faulty ignitor can glow and not turn on the dryer. Waht do you suggest? Hi, If you are having problems with ...

Ad

Question about Whirlpool Dryers

1 Answer

my cloth dryer won't dry. It is not hot. my cloth dryer won't dry. It is not hot. is it gas or electric, vent could be clogged. could need starting device. solonoid, or ignitor.

Question about LG Dryers

1 Answer

...won't work with the ignitor removed, but there should be a slight jump on the volt meter if the circuit is working properly. I usually don't bother with all that. There's far fewer ...

Question about Roper Dryers

2 Answers

...ignitor does glow, you probabley have a bad set of coils. These sit on the gas valve are easy to replace. The timer won't advance without the heat. Check this out first...Catriver..post back. 9 times ...

...ignitor going bad... Here is a tip that I wrote about that problem... Gas Dryer not Working Gas Dryer Not Heating http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not If your ...

Question about Maytag Dryers

1 Answer

...won't start. There is no clicking noise Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is ...

...won't heat at all. Checked the ignitor-it appears to glow for a few seconds and then cut off if the gas does not start. Some type of thermostat or gas regulator problem? you have the replace the ...

Question about Whirlpool Dryers

2 Answers

ignitor wire between the burner and module. Check the spark frequency. A healthy spark system will crank out three to five sparks per second. If yours is a lot slower than this, then the prime suspect

the ignitor won't glow. The ignitor must glow and change in resistance then the flame sensor must open up and kill power to the ignitor so that power will be shifted to them coils on the gas valve

Not finding what you are looking for?
Magic Chef CYE2000 Electric Commercial Dryer Logo

33 questions posted

Ask a Question

Usually answered in minutes!

Top Magic Chef Dryers Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

deton8 von Splosion

Level 3 Expert

3342 Answers

Don A
Don A

Level 3 Expert

4482 Answers

Are you a Magic Chef Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...