recently moved. not sure if the problem was there before but on the right foot stroke the crankarm is rubbing at the lower back rotation. i took the cover off, the bolt that holds the crank to machine
Question about Bh Fitness Exercise & Fitness
...recently moved it to another house. When I connect it and switch it on, the display goes on. I then insert the key, but the treadmill refuses to move. I have tried pressing the start/stop button, ...
Question about Bladez Exercise & Fitness
...recently moved. After setting up the treadmill in our new house we turned it on an the E7 error appeared with "0". We tried to press stop and up or stop and down and nothing happened. I can manually ...
...recently purchased a Horizon Quantum HRC 2 treadmill which was working fine at the sellers house. I transported it home, started it up and it worked for a few seconds, I stopped it and then the belt ...
...(85% of the time) 2) The walking beltand/or motor belt are too tight- if you have adjusted either recently. (8% ofthe time) 3) The motor has losttorque and needs brushes or has demagnetized. (5% of ...
Question about Proform Exercise & Fitness
... (85% of the time) 2) The walking belt and/or motor belt are too tight- if you have adjusted either recently. (8% of the time) 3) The motor has lost torque and needs brushes or has demagnetized. (5% ...
...recently moved or partially disassembled prior to the error, then check the cable between the drive board and the display to make sure it did not get pinched or is partially disconnected. The next ...
Question about Tunturi Exercise & Fitness
...recently moved house but used several times since and was ok. 1) Exchange batteries for new ones.2) Tight the flexible cable from keypanel vs display board.3) Tight again the connector from display ...
8 questions posted
Usually answered in minutes!
346 Questions
56 Questions
48 Questions
44 Questions