burner stove.one at a time it works good on high,low flames with two burners .10# propane tank full.Either burner one at a time has high flame.Once the second burner is lit the flames on both sides go
...stove top burner model #JP979SEF2SS . One of the burner heads takes a few minutes to light up after the clicking and when it finally does burns with a very short flame (blue) . Tried 1. adjusting the ...
...properly sealed.Or the burner head and the caps are not correctly have been matched up. The pilot lights might be burned out and need to be relighted again on your gas stove or need to be
Question about Whirlpool Kitchen Ranges
stove burners are too high on low The flame on my Whirlpool gas stove burners are too high and I'm not able to simmer anything on low. Everything overflows. either turn down the gas knob or turn knobs
Question about Kitchen Ranges
...burner Chambers stove top is very high. How do I adjust it? I have a chambers stove top that is probably from the late 60s early 70s and the left half of the burners flames got really low after a ...
...burner The frigidaire stove is new; the flame is very one of the burners. Is there an adjustment? There should be a flame adjustment screw for each burner located close to the burner itself the ...
Question about Samsung Kitchen Ranges
...burner off as soon as the pan is hot enough. This will help conserve gas and reduce your energy usage. If you are still concerned about the amount of gas being used by your stove top burners, you may ...
Question about Explorer Appliances Kitchen Ranges
...are acceptible. do for all burners As for holding the knobs that is common with this stove, you could check to see if flame is hitting sensor the burner hole that lines up the sensor may be
burner is burning low (the flame is about half the height as it used to be when turned to high). Is there something wrong with the stove, or could be a problem with the regulator on the propane tank?
...BURNER HEIGHT This stove was just delivered on 3-4. I converted it to LP myself. I am a diesel mechanic w/ 20 years on various fuels including LP. I feel the burner flame heights are way too low. All ...
61 questions posted
Usually answered in minutes!
236 Questions
35 Questions
26 Questions
21 Questions
15 Questions