Acer TravelMate 529ATX Notebook "power laptop" Questions

...power to both run the laptop & charge the battery. A very good way to do this is to compare your laptop voltage & ampere requirements (written on a sticker on the bottom of the laptop) with ...

...laptop power socket with a multi-meter, the voltageshould be slightly higher than the voltage that is printed on the label on thebottom of the adapter. If the voltage is zero or way below the voltage ...

...power to both run the laptop & charge the battery. A very good way to do this is to compare your laptop voltage & ampere requirements (written on a sticker on the bottom of the laptop) with ...

...power cord or the laptop's battery is to turn off the laptop, remove the battery, connect the power adapter, turn on the laptop & see if it works. If the laptop works directly from the power ...

...laptop's power socket could be faulty. Check power adapter?s DC plug that connects into the laptop power socket with a multi-meter, the voltage should be slightly higher than the voltage that is ...

...power on laptop. I got it to power up and then it went off again? try takeing laptop battery out and power lead then hold power button pressed for up to a minute plug your lead and battery back in ...

...laptop DC power adapter, make sure the voltage output is correct. You can test the DC power adapter with a voltmeter. 3. Let?s say the DC adapter is fine and the adapter outputs correct voltage. In ...

...90 seconds then reconnect everything then try to power it on the power button is on the top left or right of the laptop -- bring it back where you bought it and get them to show you around this ...

...power to my laptop.don't know if it's the laptop, or the powercord is there a way for me to find out if my laptop isn't working because the powercord is faulty or is it the laptop itself without ...

...laptop is opened and the power button is pushed, the light that shows it is charging is turned off and it is left on battery power alone. Have a look under your control panel for power options. I'm ...