door doesnt shut all the way flush. its open at the top of the door. it lets out heat. any ideas?? U need to fit new door hinges, only solution as they are not adjustable. Plz rate my solution. Thanks
...Need to take off damage door to replace with new one you can remove the door but due to its construction it will need to be checked by technician to make sure it doesnt leak energy after
...door' doesnt spring back open after closing does the opening along sid look to be even all the way up the side. maybe the oven door opens more than 90 degrees?? if it does id look into replacing the ...
...SUBWAY BUT OVEN DOOR CAN NOT CLOSE PROPERLY AND HEATING IS GOING TO IN DOWN.I WANT TO REPAIR MY OVEN.CAN YOU CONTECT ME. which subway are you , if the door doesnt close properly you may need new ...
...on top of door is 2 screws. undo these but hold handle at same time so it doesnt fall . once scrwes are out prise apart a little bit the lift glass then it should be of . hope this helps regards ...
door at the point where it doesnt seal,is the spring broken/missing,when the door opens and closes is there enough travel from point a to point b inside the cabinet on both sides of the hinge area, is
OVER DOOR DOESNT SHUT PROPERLY refit oven door.. its not sat right .. take it off then refit.
...door doesnt shut all the way flush. its open at the top of the door. it lets out heat. any ideas?? Try opening the the door a few inches and lift it straight up. Then push it straight down. It should ...
door is closed AND oven is in use. the door switch contacts are stuck closed causing the oven to stay on.if you can access the door switch try to wd-40 on it.if that doesnt help you need a door switch
...door doesnt meet seal You can probably adjust it. Here is a hint to work on it. USUALLY when the door is fully OPEN there are holes that you can put a nail in crossways to hold the hinges open so you ...
44 questions posted
Usually answered in minutes!
103 Questions
29 Questions
33 Questions
18 Questions
7 Questions