Malber WD1000 Front Load Washer/Dryer "tumble repair advice" Questions

Ad

Question about Bosch Washing Machines

1 Answer

tumble I am not a repair professional. I am just a 78 year old man who has been making his own repairs for about 50 years. Therefore the washer ID doesn't mean anything to me. It's been about 55 years

Ad

...repair guy? It is so common that the washing machine can make terrible noise in many ways and is a common fault. In all occasions it is important that your observation is most important and so is ...

Ad

Question about Malber Washing Machines

3 Answers

advice short of calling a repair service out? Thanks much, Mike If you dont have screws on your tumbling vanes, you can take a very small screw driver and lightly lift the vain enough for the coins to

Question about Kenmore Washing Machines

1 Answer

repair it? It is so common that the washing machine can make terrible noise in many ways and is a common fault. In all occasions it is important that your observation is most important and so is vital

...tumble dryer...it has recently stopped producing heat but still spins.i cannot find a reset button plus i have tried to find the test mode with no success.i have also cleaned all the filters..i need ...

Question about GE Washing Machines

1 Answer

...repair It is so common that the washing machine can make terrible noise in many ways and is a common fault. In all occasions it is important that your observation is most important and so is vital to ...

Question about Frigidaire Washing Machines

1 Answer

...repair nformation on most washers and dryers. I think you'll find what you need there. Don't worry about the timer, they hardly ever go bad. Good luck with it. If I have helped you, please rate my ...

...advice is to replace the whole board. You can buy a new one (expensive) or try and get a used one from a repliance repair/parts center. Is the machine really trying to ramp up or is it just tumbling ...

...repair professional, just a trained electronics and mechanical engineer of 25 years experience. My 16830 had been showing error E20 (draining problem) for a few days on and off and the tumble drier ...

Question about Washing Machines

1 Answer

tumble with partial power, the connection may be only partially defective. You may need to replace both the power cord to the dryer and the terminal block inside the dryer that the wire is attached to

Not finding what you are looking for?
Malber WD1000 Front Load Washer/Dryer Logo

246 questions posted

Ask a Question

Usually answered in minutes!

Top Malber Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

Android Man
Android Man

Level 2 Expert

278 Answers

Jason Harris
Jason Harris

Level 2 Expert

274 Answers

Are you a Malber Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...