Question about Kenmore Washing Machines
...washing machine then you could have a sensor that is faulty . The fill sensor will communicate with the control board when the washer is full to turn off the water . The fill sensor needs to be ...
Question about Fisher and Paykel Washing Machines
...washing machine flashes too full when its not. Doesn't wash my cycle because it flashes to our full replace the water level sensor . Hello! It is possible that water level sensor is broken or (more ...
...machine 1) water input valve out of order 2) If you have seen the washer tube revolve doing washer cycle => water level sensor (pressure sensor) out of order, it is not water in the tube but the ...
Question about Fisher and Paykel Washing Machines
...washing machine at the same time. This is when it started happening. Now the machine is full of water and I don't know what to do First try a power reset. Remove the power plug over night. Press and ...
Question about Admiral Washing Machines
...either by a floater sensor or by a membrane sensor that detects water pressure/volume, depending on the model. On washing machines it is usually a membrane switch, and that is faulty on your
washing machine? In other words, which cycle uses the most water, and/or how I can turn off the water sensor so that the machine uses extra water? The water levels in you machine are set by a pressure
Question about Whirlpool Washing Machines
...your board has went bad.. Could be that the water pressure sensor is detecting that the machine is already full. Find the pressure sensor and make sure that the pipe going to the water is not
...washing machine over fills with water. why? if you have a machine that you can select the level on the level sensor may be shot or the control usually the sensor. sometimes until you fix it you can ...
Question about Fisher and Paykel Washing Machines
...washing machine is beeping and is full of water, I am trying to wash a load of clothes. Used it yesterday and it worked great. Water level sensor not sensing. Check the small tube that connected to ...
...Washing Machine My GE Washing Machine filled full of water and then just stopped working. I checked the outlet, the circuit breaker, tried turning knobs. Any suggestions? Water level sensor must be ...
83 questions posted
Usually answered in minutes!
174 Questions
8 Questions
9 Questions
4 Questions
