HP iPAQ H2210 Pocket PC "not power" Questions

Ad

Question about HP iPAQ Computers & Internet

7 Answers

...not power on if the batteries charge is lower than 3.2 Volts, if your battery charge falls below the 3.2 volts level your unit will not turn on, you need to plug the iPAQ into a cradle or AC charge ...

Ad

Question about HP iPAQ Computers & Internet

1 Answer

...not flashing and power button does not seem to work. any ideas somebody? was the battery a exact replacement to the one you removed? also do you have the power adaptor for it put the old battery back ...

Ad

Question about HP iPAQ Computers & Internet

1 Answer

...not working fine, won't power on. If during the assembly of the PDA you had by accident something that prevents the swithc to work, you will have the problem. You have to check also the contacts for ...

Question about HP iPAQ Computers & Internet

1 Answer

...not start back up until i plug the power cable back in. i then have to go through the setup. what is wrong with this? I have a relatively similiar problem.I recently was given an HP ipaq h2200 as a ...

Question about HP iPAQ Computers & Internet

1 Answer

...a HX2490 PDA and it will not power on. I enabled USB charging but the PDA has died and I put it on the USB charging dock and it still wont power on. The LED lights will not even come on. Try a ...

Question about HP iPAQ Computers & Internet

1 Answer

...power on if the battery is not charged to the minimum voltage for it. If the AC wall adapter or the cable/Cradle are defective, won't power on. Put to charge the battery and confirm the orange LED ...

Question about HP iPAQ Computers & Internet

1 Answer

...not power up at this time. Will I need to reset it after it is charged? Should I have any other problems gettting it to work? Why can't I turn it on WHILE it is charging? Thanks for any suggestions. ...

Question about HP iPAQ Computers & Internet

1 Answer

...power on if the battery is not charged to the minimum voltage for it. If the AC wall adapter or the cable/Cradle are defective, won't power on. Put to charge the battery and confirm the orange LED ...

Question about HP iPAQ Computers & Internet

2 Answers

...(reset hole) with your stylus for about 2-3 seconds. The Pocket PC should reset and power back on. If the device does not power back on, make sure that the battery lock switch is to the left

Question about HP iPAQ Computers & Internet

1 Answer

...not power back on. I place it in the charging cradle and it will not charge or even flash that it is charging. I then do a soft reset it goes back to the "Serial-hp logo screen" and will not do ...

Not finding what you are looking for?
HP iPAQ H2210 Pocket PC Logo

66 questions posted

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...