...at the bottom of the mouse, and you'll find four screws which will allow you to disassemble mouse. Note: Pads have two layers. Some time when removing pads one layer remain on mouse covering
I sometimes can't drag letters. Do these logetch's wear out? Any mouse will have it's life. Chances are the buttons on the inside of the mouse soldered to the main board are going bad. Replacing them ...
Question about Microsoft Computers & Internet
...mouse. To disassemble the mouse, peel off the four glued-on rubber feet on the bottom and then remove the four Phillips head screws underneath the feet. Then carefully disassemble the top half from ...
Question about Sony Computers & Internet
disassemble the mouse and try to fix the flakey switch. Want to buy another mouse .... assumed wireless is wireless, but such is not the case. One site wanted >$100 for a new one .... no way! I
Question about Lenovo Computers & Internet
how to disassemble the lenovo wireless optical mouse n3903 There are no changeable parts in a optical mouse. If it isn't working, and your sure the batteries are good, replace it
...disassemble to apply cleaner to contacts Pull off the 2 largers slide plate stickers on the bottom. you will find 2 screws on the nose end and one on the bottom end of the mouse.. the 4th screw is ...
Question about Apple Computers & Internet
...mouse to get inside cleaned ? The Apple wireless mice aren't made to be disassembled, not even by techs. If you disassemble it to clean it, you must glue it back together. The best way to clean the ...
Question about Microsoft Computers & Internet
...disassemble the mouse? my lateral button is stucked and I want to solve this problem my right side button is stucked and I tried to unstuck it with my nails bu I couldn`t, so I think that the only ...
...Panel", and the "Mouse" control, check that the right-button is "associated" with some "action". Then, you could try to disassemble it, and clean it. As a last resort, you need to buy a
Question about Universal Computers & Internet
disassemble the mouse are under the pads on the bottom of the mouse. When you disassemble the mouse, you will find that the scroll wheel axle is gummed up, and the interruptor wheel is probably dirty.
29 questions posted
Usually answered in minutes!
5,069 Questions
2,066 Questions
1,757 Questions
1,195 Questions
1,096 Questions