Handspring Visor Edge Handheld "stylus tap center target" Questions

...stylus to tap center of target" is the message. When the target is tapped at the center, the target merely moves to a different part of the screen. How to return to normal use? im not to sure if this ...

...stylus to tap center of target" but tapping anywhere on screen doesn't seem to register. Is the touch-screen kaput? Is there an easy fix ? If there is no response anywhere at any time then you ...

...stylus to tap the center of the target. I tryed and it doesent do anything. I dont know if the stylus isnt working. Does anybody know what this may be? Try doing a soft reset on the pda, this ...

stylus to tap center of target could it need to b charged You need to follow the procedure to calibrate the digitizer. If the screen does not respond to the stylus, then the digitizer is defective and

...I reset the alignment? the screen says use stylus to tap center of target ...i do that and it goes to upper left corner i tap and it goes lower right corner and back and forth between the to

...does not respond to the stylus I tried the soft reset and the hard reset (which is now stuck on the "tap the center of the target" screen) This shows the OS is corrupted. Try to flash the ...

...stylus to tap center of target.. i did and it just goes from upper left corner to lower right corner then back and forth...... You could try operatingguides.com if you need a user manual or ...

...stylus to tap center of target does not do anything. I have tr?ed hard and soft resets, but it makes no difference Check for protective film/screen debris build-up around edges. Check for loose ...

...stylus to tap center of target". Nothing happens. soft and hard reset were both done yet nothing happens. is this locked or what? check to see if any buttons or keys are stuck down. If not, then you ...

...stylus calibration step, repeatedly prompting me to "tap the center of the target". Is this still unsolved I followed the adivce of another post and removed the screws on the back of the machine. I ...