...tray and sucked out about 1.5L of water from the bottom tray (25mls at a time through the syringe). When i couldn't suck out any more water from the bottom tray (it was still wet), i switched it ...
...1 litre of water in (this will end up on your kitchen floor, so don't put too much in). Check carefully under the machine, with a torch, around the areas where you have been working - the sensor and ...
...(be sure to replace it exactly how it was to prevent leaks-also check for leaks during and after your first test run). Lastly, run the washer empty using only 1/4 of vinegar. Hope this
1 Check the drain pump and non return valve are OK and not blocked. Check the inlet pipe strainer is clear, and if necessary clean it and descale it. Check you've got water coming out of the outlet on
35 questions posted
Usually answered in minutes!
118 Questions
95 Questions
90 Questions
67 Questions
58 Questions
