Question about Asko Washing Machines
...CHECK FOR BAD OR LOOSE BALANCE WEIGHT. LOCATED NEAR THE MOTOR. All front-load washing machines have shock absorbers that are used to dampen the tub movement in the spin cycle. The shock absorbers or ...
Question about Miele Washing Machines
loud bang when coming out of the the wash cycle and starting rinse cycle check the springs and shock absorbers. It might be the shock absorber (also called a damper I think) has broken or is too loose
Question about LG Washing Machines
washing machine model. Can you help? Go to the following web site. They have diagrams of all the appliances shoeing parts and part numbers. Search Over 2 1 Million Appliance Parts U can either buy the
Kenmore 110 25292500 shaking Check the shock absorbers. There are 4 shock absorbers on the bottom of drum two at front and two at the back of machine I think one or two of them are broken
Question about General Electric Washing Machines
...washing machine normally have 2-3 springs on top of the drum and 2-3 shock absorbers supporting the drum from underneath, check one of the shock absorbers has not become detached from the drum or ...
Question about Hotpoint Washing Machines
...washing is soaking wet. Can it be fixed? Open up behind, check to see if any spring/springs have come off. Check to see if one or more of the shock absorbers loose or faulty. The shock absorbers can ...
Question about Kenmore Washing Machines
...Check this link : http://www.espares.co.uk/advice/washing-machines/a/7/1210/wobbly-washing-machine-or-tumble-dryer.html For replacement of bearings check for tips on this visual link: ...
check if they are still in working order, the machine seems to vibrate while spinning. thanks, Ryan. Check the Vibration damper rods to be sure that... 1. They are there and mount is solid. 2. If they
machine & open up the back. One of the shock-absorbers could be loose, tighten it up with spanner. Check the shock-absorbers (dampers) by noting the position, bolts, etc and then remove them. They
...washing machine is experiencing an unbalanced load or there could be an issue with the motor or drum bearings. Here are a few things you can try: Check the load: Make sure that the clothes are ...
49 questions posted
Usually answered in minutes!
243 Questions
129 Questions
64 Questions
55 Questions
59 Questions