HP Compaq (319612-001) for Pavilion ZE4000, ZE4600, Presario 2100 Series Motherboard "remove hard drive pavillion" Questions

...remove the hard drive and see if the computer will go to the BIOS screen. If it does not, then the Motherboard has definately died. If you can get to the BIOS, then you might consider a hard drive ...

...Remove the hard disk and try it in another computer (use an external enclosure with the correct connection type). If the other computer sees your hard disk, you have a motherboard problem on your ...

...hard reset as the first procedure. Disconnect all peripheral devices and remove all USB devices and media cards. You want to test the computer not the accessories! Disconnect the AC power adapter, ...

Remove the memory modules from their slots. Take the opportunity to clean the slots on the motherboards and the memory module connectors. Use compressed air to blow dust away and clean contacts with a

Hard Drive and Memory. Remove Both H/D and Memory. C. Disconnect the CMOS Battery, located just above and top right of memory. (Next to Wireless Card). The is a white 2-pin connector. D. Flip the unit

...remove the battery for 30 seconds and put it back in and reset the CMOS, then see if it boots. If it doesn't, you might need to flash the BIOS, which is not recommended unless you know what you are ...

Remove things running in your startup that are NOT needed by going in to MSCONFIG ( Start > Run > msconfig ) go to startup tab and uncheck everything that is absolutely NOT required... any blank

Hard Drive 7) May over heating processor.Use proper heat sink FAN. 8) Remove Dust from all the ICs , components , Processor , Because of dust more Heat is occurred. 9) Some time because of confliction

...hard disk/ dvd or cd-rom . remove all led plugs make sure if you cant remember where everything goes you mark each thing you remove with numbered tape. number the part you removed and number where it ...

remove your graphics check the socket to make sure its dust free  restart your computer then reinstall it this should activate found new hardware wizard hope this helps