Campbell Hausfeld 3000 Psi Industrial Electric Pressure Washer "washer turns wand triggered" Questions

...Washer. Wand trigger Locks Up. Karcher K 3.68M Electric Pressure Washer. Working fine, then the wand trigger would not depress. Could find no blockages. When turned off the trigger will depress. When ...

...washer stalls out when wand nozzle is released cannot pull start cord unless wand trigger is depressed. if I release wand trigger while pressure washer is running the engine stalls & shuts off common ...

...carefully so you will have less trouble putting back together. Or you can opt. to replace the gun/wand as they are not expensive. Pressure Washer Wand Repair PART 1 How to fix pressure washer gun ...

karcher pressure washer trigger problem karcher pressure washer will work properly with some wands on but pump will not turn on with others The wands that it will not run with would most likley have a

shuts off when high pressure wand is attached I hook up the hose, let water run, pull the trigger and water shoots out, motors kicks on - everything is fine. Attach the "high pressure wand " to the ...

...washer-parts Hope this helps. I have the same problem. It's not the switch but the mechanism that slides inside the switch, which activates the switch to go on and off. I fnally found it so hopefully ...

...washer leaks when wand trigger is actuated and has very low pressure/flow output. After releasing trigger the pressure cycles on - off at approx 1 second interval. I suspect that the plasstic oulet ...

how do I keep wand from blowing off trigger the wand will blow off the trigger and I cannot tighten it up so it won't do that. Push it on and turn it, it should lock in place,

...washer when you first try to start them that stop underload. We had the same type of problem with 11 hp Honda if you hold the trigger open the motor will be under less load we found by running the ...

...washer was working fine then it shut off. and now I cant pull the string Honda GC 190 Whoa! Wait when water pressure is at hose you have to pull the trigger on wand to release pressure so the engine ...