Briggs & Statton Briggs & Stratton Electric Starter 12.5 16 693551 New 33-772 "connect wires engine" Questions

engine . Now disconnect one at a time the and test the coil end then the switch end or visa versa. using anything to jump or temporarily connect it to the coil or the switch just remember one end at a

...Ignition switch won't shut engine off Your kill wire from the switch to the coil is bad,disconnected or connections dirty...or switch is bad...try disconnecting the kill wire on the coil and ...

...connect or what should be done with it? What is its purpose. Fuel is gravity feed, connected directly from tank through manual shutoff valve and fuel filter to carb, no solenoid or fuel pump. Thx for ...

...wires connecting to your ignition and there shud be sum form of plug, pull it apart ( this will do no damage t oyour ped) then you shud be able to normally kik start your ped, the only down side is, ...

...engine. Found the float stuck and got it going. A week later I went to mow again, and now the gas ran from the carb and it only runs slow, and acted like it was choked. I tried the float thing again ...

...wires attached...that is the solenoid.. a quick way to see if it is bad is to put the switch on the run position then take a screw driver and cross it on both post,, making a direct connection ...

will not fire off the engine, spark plug cannot be removed from whatever it it connects to will not fire off. Spark plug cannot disconnect fron the wiring that it pushes into. it appears that section ...

How to Wire starter on a Craftman 12.5 HP I/C Gold Need to connect wiring to starter and Battery Briggs Engine Wiring Diagram

...connect wire back----Try to start & watch plug for spark---If none,try new plug----still no spark,call good mechanic. If engine does not have electronic ignition,next place to check would be is ...