KitchenAid KFCO22EVBL - French Door Bottom Mount Interior Dispensing "post dispenser directions" Questions

...dispenser light on my frig FFHS2311LB Good Morning girlsnowdog, thank you for your post! I understand you are seeking information if the unit comes with a cover over the dispenser light. However, the ...

dispenser. The ice comes out slowly and in clumps, sometimes with frost. The ice bin is not on the door. Most likely the ice door is not closing properly. Clean out the ice chute and look down it from

dispenser. Can you check that first. I also have the repair manual for the model listed above your post but I am never sure that is correct. So I need you to confirm that number again so as not to get

...post! With a French door refrigerator the water will come directly from your tap. If you would like to have the water colder you may need to run your faucet to allow the water to become colder before ...

...dispenser door does not close all the way, and frost building up inside. You are sure about the model number listed above your post? There are many versions of that model so I just need to confirm. ...

...dispenser housing and parts on your fridge are replacable and show to still be available. You can go to sears.com, click on parts, enter your model number, and see parts diagrams and lists for your ...

...dispenser again. It should work by now. If it still does not work, then the clog is not ice. You will have to call a repairman to purge the lines, or to otherwise solve the problem. Please post ...

...passes, it will absorb more moisture, and the heater kit will not work anymore. I've seen several posts where the problem came back, with no solution. So here's your permanent fix-ya: Buy a second ...

dispenser also is separated (one side from the other)I hope you can help me with this as I dont want to return it for such a minor thing. Thanks John, My E-mail is [email protected] I dont understand

you are getting water, then you will need to replace the solenoid on the refrigerator. If you could post your model number I can direct you to the part you may need