HP Pavilion dv1000 Notebook "lid close switch" Questions

lid is close, when you press the power button and when you press the sleep button. I would try turning the, " turn off screen option" to off and see if it still does it. It usually says. 'When I close

...switch that is under the Right hinge. Your laptop thinks that the top is still closed. Just remove it and cut the two wires. Closing the lid won'd sleep the PC anymore, so be sure to hibernate before ...

...close the lid of the notebook - probably to prevent overheating. The switch had failed mechanically (technical term: "fallen to bits"). As a low-cost fix, I have unscrewed the main casing including ...

switch the controls the backlighting when the lid is closed or opened? Maybe tis will help: http://www.youtube.com/watch?v=2Yi6GNFcP3w Has it been dropped, jarred, bumped? Fell over? There is a ribbon

lid, at the bottom of the lcd. You will need to remove any screws in the plastic bezels and carefully pop the bezel off to gain access to it. One other thing I should mention, I have seen some laptops

...i would check prices at ebay amazon and google you can find the numbers for the inverter and cable and lid switch on google search or amazon or ebay search ok good luck please let me know the ...

...close to see what I'm doing. Then when I plug a CRT monitor into it, it works fine. Can someone please help me? Sounds like the LCD backlight or inverter went bad. More probably the inverter,and ...

...sometimes after 10 seconds. boot continues as normal. only way to get screen back is to shut the lid to put it into standby mode, then open it again and then only under battery power. the moment ...

lid close switch stuck in the "closed" position and the back-light stays off even when you open the LCD screen or turn on the laptop. The switch turns off the back-light when you close the LCD display

...switch it on. Remove the battery, push the power button for 15 seconds. Leave the battery out and power back on with just the AC adapter. If your system boots back up, go to the control panel> ...