HP Compaq Presario V2000 Notebook "screen gone dark" Questions

...screen stay dark. Attaching an external monitor works fine. No hardware errors are present. The machine has not been dropped or damaged in any way. Symptom "just arose" during a boot up. Battery ad ...

...gone? If it is very dark and you can barely see anything on the screen, it may be that the inverter board has failed and needs replacing. The problem could also be caused by the screen itself, or the ...

screen gone dark Hello. I started my laptop up in the morning as usual noticing that the screen was blank. I restarted with the same result. When I touch the hybernation/screen close switch the screen

...screen, then its the inverter coil or the inverter itself which has gone bad or maybe even worked itself loose causing a bad connection. Either way you will have to take it to PC repair shop to be ...

...screen it was gone but comes many times then again i would hit later on the screen was completly lost then had to replace the screen yous is a starting period so go to a nearby computer service and ...

...gone out on you. You will have to watch ebay for a board. I just searched and nothing except batterys and keyboards are available. The video card will overheat on these models if the fan is not on or ...

...Screen ib very, very dark... does not light. This is form an old post.... So once you think windows has loaded, under a bright light see if you can actually see your desktop, albeit very dark. ...

...Screen dark yet computer works with external monitor My Compaq Presario R3000 monitor has gone so dark that I cannot see it. It hasn't completely gone out, the images are there, but too dark to see. ...

...or back and forth. What can have gone wrong? the light guns inside of a monitor can weaken with long use..also, the screen itself can lose it's phosphor coating as well.. your service person is ...

...screen at the right angle.  First assumption would naturally be that the back light or inverter has gone out, but if you'll hold the function key at bottom left and and press F5 which puts ...