HP Compaq Presario V2000 Notebook "broken monitor stand" Questions

...broken screen on my laptop so i connect a desktop moniter to it but its not transfering to it.? the light on monitor even turns from green to orange like its on stand by. Power up the monitor first ...

...monitor, the graghic chipset is ok. BUT you may have a problem with a broken wire that runs to the lcd panel. Replacing is Not for the average user to fix. Make sure it isnt your Video Chipset 1st as ...

...up on your monitor than this is a sign that your screen on your laptop or a part pertaining to it is loose or broken. If not than it could mean bigger issues, but try that first. Thanks and Good

broken (varying in size between 1/2 and 1.5 millimeter). I soldered some copper wires over the fractures, and that did the trick. It works again! Biggest challenge now is to get it assembled again :-)

...monitor died, or one of the connections - power or graphics ribbon - burned out. This is not a d-i-y sort of fix, unless you love to tinker and are willing to declare the laptop a possible dead loss. ...

...monitor means your graphics chipset is okay.Problem lies with a;1) Bad Video Cable, or a 2) Bad screen Inverter, or a 3) Bad LCD screenA) How to check the Video Cable? (Dell = Display-feed flex ...

...monitor, you have a bad graphics chipset. (G.P.U.)If Not, the problem lies in the Display Cable, or screen Inverter, or LCD screen.As you have seen the Display Cable connects to the motherboard, then ...

...monitor/lid to the base has snapped off. There is a piece of thin white wire showing but appears to still be attached to something at each end! This happened about a month ago but the computer still ...

...broken. Can I hook up a stand alone LCD Monitor to it and be able to see the desk top, or will I first have to get a driver for it? No! you should be able to use a stand alone LCD monitor without any ...

...broken solder joints.But fixing these problems can often be a short term solution. The bulbs themselves have a limited lifespan, and the high voltage power supplies are prone to failure. The panels ...