HP DVD Writer (ds703a) (DS703A) DVD+RW Burner "faults" Questions

wireing diagam for vauxhall combo diesel van rac engineer repaired fault for door locks traced fault to fuse board but since then no reverse lights

my computer turns on but wont load then turns off . Can be lots of things, common ones : USB shorting the PC - remove all usb devices PSU not coping with demand, again remove all devices Board fault ...

...unit well. If it was working before the software change, it is probable that there are no hardware faults, but I would not rule anything out. Jerry

Blank DVD Causes PC Reboot Samsung SH-S182D DVD writer causes a PC reboot when I put a blank DVD+R in. It reads disks with data on with no problems. In fact if you reboot the PC a few times with a ...

dvd stops burning it is actually a hp 1040i and when I installed it my burning either stops in the middle or doesn't start at all. depending on how old your drive is, it could be the laser is faulting

my cannon machine shows error 805 when i start the machine pls solve my problem the internal fan is not working and that is the code for it. there is a fan inside with 3-4 wire on it one wire on the ...

CD/DVD won't eject, won't play, Device Manager doesn't recognize. I have a Dell Inspiron E1505. The DVD+RW that came with the computer is a NEC DVD+TW ND-6650A. The computer is about 8 months old. All

dvd troubleshoot my dvd drive doesnt read most of my cds it only reads audio cds and original dvds doesnt read burned dvds... can u please help me will be great full... im usin a sumsung double layer ...

doesnt read it wont let me burn or pick up the burner like it dont exist Clean the lens normally the cause of you fault after that reinstall the drivers for it. Thanks J

CD tria come out automaticaly .When ever i close the tria it will come out. Check the button isn't broken. Otherwise there is an internal fault and it will need replacing (servicing would cost more ...