HP ProLiant ML370 G3 Server "scsi raid" Questions

...Raid which it does if the SCSI drive is powered off. BIOS seems correct. Try to disable boot to other device on your bios setting.Make sure that your Smart Raid is set on the first boot device. ML350 ...

SCSI RAID controller. You will need to get a separate SE SCSI HBA instead. These are pretty cheap, usually just over $100 list from HP. If you haven't attached anything new, then you should check your

...scsi driver proliant ml 370 for NT4 when i boot server for reformat partition C:\ server can't detect hardisk... Are you attempting to boot from the Windows CD? If you are booting the server from a ...

...RAID 5 (drive D:). suddenly i lost D: drive and upon checking it says the logical drives are disabled because of a problem. rebooting produces the following message: 779 - Slot 0 Drive Array - ...

scsi SATA Raid Array. Your situation isn't much different. It is a weakness of Windows that you have to take several steps to prepare for a scsi or sata raid or non raid setup. There are two things to

...SCSI If the only drive you changed was the drive that failed and all the others are in the correct sequence, then that's a good thing. The next question is, did you have this system setup in a RAID ...

...SCSI -15000 rpm. I do have a spare Machine of the same make and model i.e HP DL380 G4 and a copy of Acronis Echo . I need to know how best to install the new HDD and build the Raid Array and and copy ...

SCSI, W2K. I want intall RAID 1 Can I help me??? unable to understand your question. If you want to configure raid 1 and install OS freshly then follow these steps.1) make ready all the required h/w.2

...scsi but when my os windows small business server 2003 it gives me "setup either detected multiple disk in your machine that are indistinguishable or detected raw disk(s). Setup has corrected the ...

...slot, but no deal. It wont accept it. All others it will. AArgh. Except i dont have any other raid-controllers using old U320 scsi :( it will be a controller card problem / SA5300 is 100% ...