HP DeskJet 340 InkJet Printer "print cartridge" Questions

...print cartridge cradle moves to the center of the printer and is idle and quiet. If you are replacing a print cartridge, press down on the print cartridge to be replaced, and then slide it out of the ...

...print cartridge, or the gray photo print cartridge NOTE: The black, photo print cartridge, or the gray photo print cartridge is in the right side of the carriage. -Lower the cover of the product. -If ...

...print cartridge is low, a message appears onyour computer screen. You can also check the ink levels by using the softwareinstalled with the HP All-in-One.When you receive a low-ink warning message, ...

...print cartridge door allowing the print carriage to move to the far right side of the unit. Once the print carriage has stopped, lightly press down on a print cartridge to release it. Pull the print ...

...Print Cartridge Status The Print Cartridge Status Light flashes when one or both of your print cartridges are low on ink, improperly installed, or malfunctioning. It will also flash if you are trying ...

...print cartridge out of the print cartridge cradle and discard it. Remove the replacement print cartridge from its packaging and carefully remove the plastic tape. Hold the print cartridge so that the ...

...print cartridge door. The print carriage should move to the far right side of the product. If the print carriage does not move to the right side, turn the product off, and then on. 3. Wait until the ...

...print-cartridge access door is lifted to access the print cartridges, the printer will not release the cartridges for changing. Damage may occur to the HP Deskjet printer if the print cartridges are ...

...print cartridge door. The print carriage should move to the far right side of the product. If the print carriage does not move to the right side, turn the product off, and then on. 3. Wait until the ...

...print cartridge cradle will move to the center of the printer. 2. Lift up one of the print cartridge latches. 3. Grasp the top of the print cartridge and pull it out of its cradle. 4. Repeat Steps 2 ...