HP DeskJet 1000cxi InkJet Printer "reattach encoder" Questions

...ribbon that spans from one end to the other behind the carriage has come off its bracket. How do I reattach it and where? plastic ribbon is "encoder strip" encoder strip fitted in carriage block ...

encoder strip has come off the hook. If so simply reattach it to the little metal hook and the printer should start working again. . Have you already tried these steps? http://h10025.www1.hp.com/ewfrf

...encoder strip on my v305 printer is not attached, i dont know where or how to reattach, anyone have a clue?? thanks If it is not installed anymore then it probably broke on one of the ends. Check to ...

reattach encoder strip? Lexmark 6170 received the hardware error 502 on my Lexmark 6170. while trying to fit it into the slot on the back of the cartridge carrier, encoder strip came off on both sides

small thin strip (clear) stretches across the machine has come loose? how to reattach it and to where? it is encoder strip. before u fix it you find out whether both side holes are covered or damaged

...reattach at the freed end. it would be required that the encoder be cleaned free of smudges/ink/marks as these would make the printer think there is a jam on the carriage. Good luck and Thank you for ...

...reattach my encoder strip, and finally figured out the way to do it after reading many web postings, and my own trial and error. The key is to use a "dental mirror" that you can pick up at a pharmacy ...

...reattach my encoder strip, and finally figured out the way to do it after reading many web postings, and my own trial and error. The key is to use a "dental mirror" that you can pick up at a pharmacy ...

...printer power cord from the electrical outlet and from the back of the printer for 10 seconds then reattaching the cord at both ends. Check with manufacturer if printer is still covered under ...

...encoder strip reattach help needed hardware error 0502 came up when I found the encoder stip was off completely - although I got the strip hooked back up onto both sides, the strip doesn't seem to be ...