HP DeskJet 970cxi InkJet Printer "flashing cartidge light" Questions

...light flashing all of the time many times the prenter print out paper to align cartidges then I scan the paper but it didn't stop doing that. later on the top resume light flashing all of the time . ...

...some HP printers do this after a non original cartridge used The printer should still be able to operate even with the light flashing. If this does not work you may require to replace the print

...place) at the back of the printer is inserted and locked correctly. If it's not the printer flashes the power light on very briefly and will not power. ur both cartidge not seated properly. check ...

cartidge light is flashing but all the cartidge is inserted properly. Hello, in that case you will have to reset the printer; Follow the procedures below to successfully reset your printer: 1. Without

...mid task with a piece of paper still in the rollers. Both of the lights on the right-hand side were flashing. There are two nearly new cartidges in the machine and I was able to remove the partly ...

hp 920c tech support While printing, print suddenly stopped and gave me an error message something concerning the pen driver and the yellow ink lighted flashed, I changed the cartidge and got the same

...cartidge light keeps on flashing tried replacing with new cartridges still the same the PCA is held to the carriage /cradle by usually one or more screws. sometimes these loosen over time, so while ...

...flashing. Have tried shutting it off and unplugging but no help??? Bryan The teardrap light imples that your ink cartridge needs replacing or is incorrectly installed. If you have recently replace ...

...cartidge cleaning cycle. Neither of these solves the problem. The green light on the printer constantly flashes. When I use the clean the cartridges feature I still get the error message. HP Deskjet ...

...flashing and on the PC it says the Printer is out of paper when I try to print a test page although the tray has paper in it!! Any solutions please!!I have already tried cleaning the rollers at the ...