Question about HP OfficeJet Office Equipment & Supplies
...Open Printers and Faxes Folder Check if there is any documents stuck in Queue on the printer icon If yes, Right click on the icon and click Cancel all documents, ( do it 2-3 times ) Refresh the page ...
Question about Epson Office Equipment & Supplies
...stuck shreds of torn paper from previous jams. Turn off the printer before you attempt to remove the bits of paper you can also you a light blower or vaccum to clean the printer be sure to remove the ...
Question about HP Office Equipment & Supplies
...stuck in queue issue. Try the steps below. Open Control panel Open Printers folder Right Click on the printer icon and Click Troubleshoot Follow the screen instructions and complete it. Turn off the ...
...stuck in it, and following all 4 steps stated on the HP website. Such as taking the back cover off and blowing dust away and turning it off and on, etc. None of these steps worked for me and ...
Question about HP OfficeJet Office Equipment & Supplies
...open allowing you to fax. Now comes the problem. Often it will not scan the first time, I almost always get the message ¨SCAN FAILED¨ the first time I scan. Just click scan again without touching the ...
...open the access cover. 2. Look for any obstructions in the paper path and remove them if necessary. (It is possible to move the carrier assembly with the power off.) 3. Turn the printer on, load some ...
Open the cartridge access door and Remove all the ink cartridges in the All-I-One. Now above where we have removed the ink cartridges we should see a carriage which moves from left to right on a steel
Question about HP OfficeJet Office Equipment & Supplies
...Open "System Preferences" under the Apple menu in the upper left corner. 2: Click on "Print & Fax" 3: Click the "+" to add a printer 4: "Lexmark 4200 Series" should show up under the default tad ...
open on your taskbar I had this problem before I would shut down anything that I felt didnt need to be running to spd up my comp then when I went to scan I got the error message, opened up the imaging
stuck! I have a printer utility which from I can see how much ink is available, and also do a test print to make sure the cartridge print ok, and they do. i tried old and new drivers too!! Emma DRIVER
185 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions