HP Officejet 7310 All-In-One Printer "line appears using adf" Questions

...line appears when you scan on the flatbed. If so, it is probably a hardware failure. If it appears only when using the ADF, you need to clean the ADF. HP has a general diagnostic and cleaning ...

...line appears yellow Hi, Over time the automatic document feeder (ADF) will get dirty, occasionally causing vertical black streaks or lines in scans and copies . Manual cleaning of the ADF might be ...

...line appears. Determine where the line is...right side, middle, left side. Lift the ADF up. If you have to lay the paper down on the glass and match the line to the glass. There has to be a piece of ...

...ADF feeds, 11in long for 8 1/2 by 11) You can try cleaning the glass the scanner uses when it's using the document feeder. Pull up the top left part of the printer where the documents feed, there's a ...

...line that appears. I noticed that there are 2 additional rollers that propell the document from the feeder to the output station, but they do not roll unless a document is fed through the rollers. I ...

...line appears down middle of copies and faxes If this happens while using the ADF, you most likely have a piece of dirt or white out (most common) on th escanner glass. Clean with microfiber to avoid ...

...line through them. I am not using the ADF. I have cleaned the glass & looked at the glass and it does not appear to be scratched. The vertical line is consistent and occurs in scans as well as ...

...appears the align printhead function is stalled. Any help would be greatly appreciated. Hi, Try using this link for print quality issues from HP ...

...ADF (not directly to the scanner's glass), please try to clean the narrow piece of glass located at the left of the scaner's glass. Usually, any trace of ink or dirt located on that strip of glass ...