HP OfficeJet k60 All-In-One InkJet Printer "back off" Questions

...off. Once it has booted back up to the desktop,turn the power switch back on for the printer. Hello, Please follow the following link from HP.com in order to resolve this particular problem : ...

...problems with paper jams all of the time and it won't print once it jams. I turned off the printer, unplugged it, plugged it back in and turned the printer back on and it worked. You could try

...off then turn it back on to fix the flashing light problem, so that the printer would work. Now when we turn it off, it turns itself back on and the lights continue to flash rapidly. It now takes ...

back. The back door easily pops off. The manual says to gentle wipe the rollers with distilled water and a soft cloth, then let dry for 15 minutes. I did this (with tap water) and it solved my problem

...OFF, press power button to turn it ON. Semi-Full reset Remove the ink cartridges. Remove the power cable from back side of the printer while its ON. Press and hold "#" and "6" button, while holding ...

...back to shutting down mode Hi Try resetting the printer, follow below steps Power Drain: Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet. Press and ...

...the unit. 3 Dry the glass with a chamois or cellulose sponge to prevent spotting. clean the lid backing Minor debris can accumulate on the white document-backing located underneath the unit?s

...off the hook Hi, Disconnect the power cord from back of the printer ( while printer is power on ) While holding the # and 6 key connect the cord back ( This step will erase all the fax logs and ...

...off, hold the # and 6 keys while turning back on. If this does not work, do a hard reset - same thing except # and 9 keys. If this does not work, the printer needs to be serviced or replaced. Hope ...

...back of the printer and then turn off th printer. turn it on after few seconds. check whether you have the error message and if not plug the telephone cable back to the printer. if it is not working ...