...scan in lightly. I havent found a piece of software to do just this, batch darken what has been scanned (at least not for free). Copying before scanning is the work around. Hope this helps everyone ...
...darken scans. Access the seocndary service on the printerand run a scan calibration, hit Setup once, press left arrow and cancel for 2 seconds, release, hit set up again.. that will get you to the ...
...scan and print, but the print is very light. How can I darken it? Try to use the Lexmark All-In-One Center Application on your computer to adjust the darkness of your prints. On your computer, click ...
...menu and look for copy/print settings. you should see an option to lighten or darken the copy. It should look like a ascending /descending slider. tap to the left for lighter or to the right for ...
do I darken when making copies? If I scan the doc to a pdf & then print it comes out fine. Thanks There should be a light/dark slider on the LCD display, just move it up towards the darker setting
...copy, appears on all manual scans too! Clean the glass. If there colud be failing CCD- to prove this do a scan to PC and check out the saved image If it is still there- check out Dell for replacement ...
Fix light copies on Sharp AR 5631 if you darken the copies with the contrast adjustment and it is still light then you need to replace the drum... if its still light then replace the scan lamp...
4 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions
