remove service station, found dirty? remove motors, remove service station cover, clean entire unit with water, ensure that stocked ink entire should washed out, allow service station to dry
remove & take out service station, check any objects in service station movement, remove motor clean entire unit with water you can find out lot of ink inside & too dirty clean it allow to dry
Question about HP DesignJet Office Equipment & Supplies
remove & take out service station, check any objects in service station movement, remove motor clean entire unit with water you can find out lot of ink inside & too dirty clean it allow to dry
remove & take out service station, check any objects in service station movement, remove motor clean entire unit with water you can find out lot of ink inside & too dirty clean it allow to dry
...remove it you just perform a service utility to unlock the carriage assembly which is normally locked by the service station in order to cap the print heads. Switch off the printer after performing ...
service station, remove motors, clean entire service station with water, ensure that entire ink should be washed out allow it for dry, apply grease to the moving parts, fix it back, check...( cleaning
Question about HP DesignJet Office Equipment & Supplies
...from the Service Station Cable. 4. Remove the screw (item 1) that attaches the Drop Detector Assembly (item 2) to the Service Station (item 3). 5. Remove the Drop Detector from the Service ...
remove the current service station and strip and clear all waste ink- wash thoroughly and allow to dry- then refit, apply a thin layer if 3 in1 oil to the contact surface of the service station wheel.
Remove service station clean with forced water, allow it to dry, apply silicon grease for smooth movement, fix it back.. test it..I hope this exercise will resolves you issue.. but its too dirty work,
114 questions posted
Usually answered in minutes!
125 Questions
147 Questions
140 Questions
140 Questions
87 Questions