...printing out of windows causes issues Machine says it has recieved data but the prints nothing this happens over and over again have uninstalled driver, reinstalled new ones from HP and rebooted but ...
...Epson C120 I started getting this message: printing data from another port. This happened minutes after I printed a document without any problems.... thanks for your help! Tom open the printer ...
...printing. Hope this helps. The Epson SX218 is a pretty good and 'fast' printer. If it appears to be slow, then you are probably printing in the 'fine'' or 'photo' mode: this is not necessary for day ...
printing data from another port depends on the printer network interfaces. does it use usb port only or does it have an ethernet interface. What do you mean by another port ? Do you mean another ...
Question about HP DesignJet Office Equipment & Supplies
Epson TM-U220 Matrix Printer not printing in WinXPP I have installed the Epson TM-U220 Matrix Printer for use with a POS system running on WinXPP. Using the Prallel Printer Cable, I am able to ...
Question about HP DesignJet Office Equipment & Supplies
...data transmission from your pc to the printer. Try switching usb port for your printer. Unplug your printer usb cable connected to the pc and then plug it to other usb port. If this doesn't work, ...
...Epson TM-U220 Receipt printer uses a Windows Generic driver, not an APD driver or anyother. If you install anyother driver, chances are, you'll end up with it not printing and showing a status of NOT ...
Question about HP DesignJet Office Equipment & Supplies
...port cable. The data passing over the USB cable will have to converted from a serial format to a parallel format before the printed can store the data, Next, the converted has to add the required ...
...epson. 1 printer- 1 port, so by then check if the box for enable bidirectional support is check, remove the check mark from the box by clicking on it then hit apply then try printing a test page then ...
Question about Epson Office Equipment & Supplies
Epson TM88II and it only prints question marks. How can I solve this ??? Assuming using serial port ??? Question marks are substituted for bad data. Normal reason for this is incorrect Baud rate. Test
175 questions posted
Usually answered in minutes!
125 Questions
147 Questions
140 Questions
87 Questions
92 Questions
