Miele Cat & Dog 326i Bagged Canister Vacuum "hoover vacuum hot stopped working" Questions

Hoover Pet Cyclonic upright stopped working while I was using it. The bottom felt really hot so I emptied the canister & laid the vacuum down with the bottom in the air to cool off & went back

Hoover seems very hot. Will not work. Checked fuse Give the vacuum time to coold\ down, then try again. If it still doesn't work, take it to a repair shop to be checked. When a vacuum is used for long

Hoover vacuum is a nightmare! I have had nothing but problems with it since day 1. The powerhead stops working if you try to lower the handle to vacuum. I took it in to be serviced and was told it sat

vacuum shuts down after 5-10 min of use I start vacuuming and after a few minutes it just stops and you can't get it to work for about 20 minutes. It may have a problem of overheating. If you havn't ...

...Hoover F5807 SteamVac Wet/Dry Vacuum. Well, there are 2 tanks, one is the water solution tank that is on top and the other is the water recovery tank of which is on the bottom. You use the trigger ...

...Hoover Pet Cyclonic upright stops working while using it. The bottom feels hot when this happens. When it first occurred, I emptied the canister and even tried a different plug. It did not turn back ...

Hoover Rewind, the plug always got hot, tonight it just stopped working, I know it is not expensive and older but I really don't want to buy a new one if I can avoid it at this moment I am not sure of

...hoover and works fine but after 15 minutes it stops as if it was turned off, if i leave it for a period (2 hrs)it will start up again and work for a further 15 mins before shutting down. Hi there All ...

...Hoover cut out and will not work. Emptied bag and replaced fuse but no success. If no burning or smelling, maybe nothing to do with motor, and if caused by the safety cut-out, it will need about an ...

...hot or burning I would discontinue use and take it to a repair center. Vacuum cleaners can have this burning smell because of belt slippage but these have no belt. This sounds more like the motor is ...