Question about HP LaserJet Office Equipment & Supplies
...paper settings within the copier to reflect heavy paper for the bypass tray. You'll need to make this a default setting. Then when you print out with heavy paper via the print drivers it should pick ...
...paper size settings in the paper tray. Pull tray 2 out and check the paper guides. Make sure the paper guide in the front and left of the paper tray are set for the correct media type (letter, legal, ...
Question about HP LaserJet Office Equipment & Supplies
paper settings Make sure that the default paper size matches the width and length of the paper loaded in the tray. If the paper loaded in the tray is different from the paper size setting, the printer
...paper type. xxxx...set or tick Via operations panel you can also printout current settings too to see if you have done the change if you do one before and after Then test, There are other settings on ...
paper-handling settings, such as default paper size and default paper type. ● Print quality. Change the all-in-one print-quality settings. ● Paper types. Change the all-in-one mode
Question about HP LaserJet Office Equipment & Supplies
...settings in the paper tray - Tray 2, be on A4, letter, depends on what format print. Then check in your printer settings to be identical: Menu, paper heandling, Tray2, paper size, and paper type ...
Question about HP LaserJet Office Equipment & Supplies
...location the printer thinks it is a different size of paper. Also make sure the selector on the tray is set to the correct size. If all these are good you should reset all the settings to
Question about HP LaserJet Office Equipment & Supplies
...paper settings in the print driver do not match the paper loaded in the paper tray.The rubber paper-feed rollers are coated with dust. Check the media and print settings Clean the rollers try this. ...
...THE US POSTAL SERVICE, MUCH OF THE PRINT IS RUBBED OFF. When printing envelopes ensure you set paper/media type to Envelopes, and feed via tray 1/bypass . Paper type setting sets correct fuser ...
...the right paper type and size from the settings (After you choose the paper type you have to go all the way back through the menus on the printer and choose the paper size as well)
198 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions