Question about HP LaserJet Office Equipment & Supplies
...2 EIO slots (EIO 0 or EIO 1). One of the slots is probably the JetDirect card (network card) for the printer. The second slot might be a hard drive but is usually open. If you are getting a EIO error ...
Question about HP LaserJet Office Equipment & Supplies
...card. Turn power off and reseat the card. Power up, if problem is still there put the card in the other EIO slot. There should be 2 EIO slots. If it still fails you will have to replace the ...
EIO 2.There are two screws that hold the EIO cover on. Power up and try the printer. If it works, take the two screws and the cover and use it to cover EIO 1. And you are good to go. If it fails again
Question about HP LaserJet Office Equipment & Supplies
...EIO 2 ERROR The 82.XX error represents that the External Card which is located in the formatter of the machine, either is bad or the port in the formatter is bad (This could be a Network Card or a ...
Question about HP LaserJet Office Equipment & Supplies
don't know what it is. this is a network card error. the EIO card in slot 3 is probably faulty. Try swapping the card into slot 1 or 2. If you get the same error then you will need to replace the card
...will occur. 2. Check that all cables are connected to the EIO ports and that the EIO board is seated properly. 3. If possible, print to another network printer to verify the network is working ...
...2. Turn the printer off. 3. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in slot J1.) 4. Remove all of the EIO devices from the printer. 5. Turn the ...
...2. Press Stop to clear all print jobs from the printer memory. 3. Turn the printer off and then on. 4. Try printing a job using a different software program. If the job prints, try using the original ...
EIO 2 ERROR I printed a document and then when I tried to print another document I got the error message. How can I fix this immediately? Thank you for contacting FixYa with your printer inquiry. This
2. Try printing a job from a different program. If the job prints, try printing a different file from the original program. If the message appears only with a certain program or print job, contact the
198 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions