Question about HP LaserJet Office Equipment & Supplies
Scanner Unit Disassembly Procedure This is not an Hewlett Packard document, the author does not work for Hewlett Packard and is not responsible for any damage you do to your printer. This procedure is
...open the scanner assembly. Figure 1: Example of scanner release button location Open the top cover. Figure 2: Example of top cover being opened Grasp the imaging drum handle, and then rotate the drum ...
Scanner Unit Disassembly Procedure This is not an Hewlett Packard document, the author does not work for Hewlett Packard and is not responsible for any damage you do to your printer. This procedure is
...error power on power off message come the scanner under the glass has a problem. turn the machine on with the top cover open and see if you notice the scanner moving either to the left or
Question about HP LaserJet Office Equipment & Supplies
...scanner formatter. You will need to open left cover, and remove the 2 screws and remove the smaller left cover. The scanner formatter can now be seen. If above steps do not resolve problem, replace ...
scanner error 5 Try this one open up the scanning lid, use a small allen wrench and pull the screw at the left side of the frame that holds a 1 inch wide by 12 inch long piece of glass. pot ur finger ...
Question about HP LaserJet Office Equipment & Supplies
...OF OPENING THE PRINTER OPEN THE TOP COVER AND THE SCANNER UNITE SIDE AND CLEAN OFF ALL THE DENTS ON THE SUFFACE OF THE SCANNER AND COPPLE IT BACK AND TEST.AM SURE THAT WIULL SOLVE YOUR ...
...open the scanner assembly. Open the cartridge door. Make sure that the correct print-cartridge slot is in the access position. If the correct print-cartridge slot is not in the access position, close ...
...Open It Scaner And Clean It Or Call Professional Eng 9220949183 I can not scan on my HP 2840. here is the error message. an error ocurred during preview. If the scanner is being used, please wait for ...
Question about HP LaserJet Office Equipment & Supplies
...Brief:open left, right, top covers., remove laser scanner assembly., remove protected cover., u can observe that, a movable shutter ment for stops the laser beam., remove it., fix all back..
304 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions