...damaged. Possible wear and fuser fixing film. can change throughout the whole fuser RM1-0661-040 ---- HP LJ1010 220V Fuser Assembly RM1-0660 ---FUSER - 120 Volt Fuser Assembly or parts of this ...
damaged. 2. Reconnect the connectors of the fuser control PCA (J303, J305) and the DC controller PCA (J107). 3. Replace the fuser. See Fuser on page 191. This is from the service manual the fuser unit
fuser error How to fix this problem that my printer has? Turn the printer off and leave it off for at least 30 minutes. Turn it back on. If the error recurs, turn the printer off and unplug it. Remove
Question about HP LaserJet Office Equipment & Supplies
i have hp lj 1300 printer befor problem fuser sleeve damage that is repalacing and fixing but now not working only read light bilnking how can repair sir red light blinking gnerally for 1.door open ...
...fix it back, power on the printer, chek errors,adjust fuser temperature in low, give prints up to 50 blank copies, chk.. if problem repeated replace Fuser assembly, but success rate is 70% for above ...
fuser fixing film is damaged. This can be fixed without replacing the entire fuser. 3. You have a refilled or remanufactured cartridge and the wrong toner was put in the cartridge. If you have another
"cleaning" pages through. No fix. Any ideas?? Most likely the fuser mylar has been torn or is very dirty on the right side. Take the fuser out and visibly inspect for damage. If it is damaged, replace
Question about HP LaserJet Office Equipment & Supplies
...fuser itself would be approx Aus$250, no simple fix for you I'm sorry....these were a good unit but I wouldn't fix it, I find that normally this is a sign that time has come for this unit, fix this ...
Question about HP LaserJet Office Equipment & Supplies
fix the problem because they will open the whole printer.Fuser film roller is color orange that u can see through. It is quite damage due to high volume of printing and this fuser film roller start to
Question about HP LaserJet Office Equipment & Supplies
...damaged. Here is a link to a post about the Laserjet 2100 printer with the same issue. It has pictures of the roller and what to look for, the fuser is different but the principle is the same. ...
304 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions