power light. I have gone through the usual routine to clear a paper jam and there is not one. I've also turned it on and off however I am unabe to clear the error and as therefore cannot print. Do you
Question about HP DeskJet Office Equipment & Supplies
...Error" light. With regards to a 960C Hewlett Packard or almost any inkjet printer, the Amber light is indicating that one of the Ink Cartridges (Tri-Color/Black) is empty, defective, unrecognizable, ...
Question about Dell Office Equipment & Supplies
...Error light is on, close the front door. At this point Continue, Ready/Data, Toner Low, and Load Paper should all be lit. If the previous set of steps did not go as described then do not continue. ...
...error and cycle power to continue By any chance do you have a duplexer on this printer? The error code says that the duplexer has a bad fan. Power down the printer and remove the duplexer. Power up ...
...ERROR alternates with CYCLE POWER TO CONTINUE An internal communications error occurred. The page containing the error will automatically be reprinted. 1. Check the power at the printer location. 2. ...
...ERROR CYCLE POWER Control Panel Message 61.x PRINTER ERROR CYCLE POWER Event Log Error Service Message 61.0x.00 The printer encountered a parity error when accessing either internal memory (x = 0) or ...
...cycle power ERROR AS "THERMISTOR OPENED.CYCLE POWER" IS OBTAINED Dear It might be thermostat open, pl. open the fusser assembly check the thermostat for continuity one or two bottom like thing having ...
Question about HP DeskJet Office Equipment & Supplies
ERROR alternates with CYCLE POWER TO CONTINUE An internal communications error occurred. The page containing the error will automatically be reprinted. 1. Check the power at the customer’s location. 2
Question about Kodak Office Equipment & Supplies
...error continues even after you close the printer access door, power cycle the printer: Turn off the power (press the On/Off button on the printer). Unplug the printer power cord from the back of the ...
Question about Dell Office Equipment & Supplies
Error LED is on solid, then release the Continue button. 4. Close the front door. The Continue button, Ready/Data, Toner Low, and Load Paper LEDs should all be lit. 5. Wait for the printer to complete
189 questions posted
Usually answered in minutes!
2,162 Questions
707 Questions
530 Questions
316 Questions
318 Questions
