Question about Zebra Office Equipment & Supplies
The lables will not advance unless you hold down the lid tight, also we didn't use it for a while because of this problem and not when you hold the lid down no printing is on the lable. there's a ...
Question about HP Office Equipment & Supplies
problem lifting cartridge lid on model dx7400 problem lifting cartridge lid on model dx7400 press top of lid to lift cover but no luck There's a small "latch" that holds the top of the lid "down". ...
Question about HP Office Equipment & Supplies
My printer doesn't recognize that I've closed the scanner lid I ran out of ink. I opened the scanner lid, took out the old ink dispensers, and replaced them with new ones. When I closed the lid and ...
replaced color ink cartridge and now the lid will not close! When I opened the lid to replace the ink cartridge there was a loud crack and now the lid will not close properly. HI there, Please check ...
...cover With printer facing away from you, remove the screw from under the right-hand corner of the lid at the very back behind the hinge. Then remove the two (shorter) screws from the top of the
says copier lid open i change the ink cartridge and closed the lid and now all it says is the compartment is still open even though the lid is closed please help The small "sensor" that should "trip" ...
Question about HP Office Equipment & Supplies
...This may fix it. If it doesn't turn off the power and remove the two screws that hold the scanner lid on. Then remover the other 6 screws located under the lid on the left side while the lid is ...
My copier says Paten is open closet paten. but everything is closed. what do I do? Each lid has its sensor. Usually this salients on lid, you it is necessary attentively to look, what salient overlays
Printer lid does not latch properly After refilling the ink cartridge I am having a problem getting the lid to latch properly. If it does not go right down the printer will not work but I do not ...
Question about HP Office Equipment & Supplies
...This is supposed to automatically do this when I open the top portion of the printer. With the lid open, you will see the two arms that stick out of the lid, and go into the body of the printer, ...
421 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions