HP DesignJet 500ps InkJet Printer "cleaning station 500" Questions

...500 24-in Roll Printer error message 2110 Service Station failure. The possible cause could be: The steps counted by the Service Station motor are not consistent with the expected length of the ...

...station assy,try cleaning with a lint free cloth,try replacing cartridge and if the issue still persists conduct service test for ink station assy if the result is negative replace the ink station ...

...500, which I recently replaced the belt on, and was working, says System error 21:10 and contact hp support? System Error 21:10 refers to the Service Station, the Aerosol fan is probably dirty. Clean ...

...Station/Aerosol Fan Assembly Clean the slider rails on the machine with a damp cloth to remove ink build up. Now oil the rails with some silicone oil. You can also add a few drops of oil to the foam ...

printer maintanance advised you can replace your carriage belt, ink station, and clean it up

...Cleaning this thing up is a messy affair. The absorbtion pads need to be cleaned and dried before they go back in. We have a washing machine dedicated to this task. You can do it in your own washing ...

...500 there is nothing easy about this problem. you need torx 8,9,10, and 15 drivers. remove the right cover, remove the service station without breaking it, remove the right frame that holds the ...

cleaning the station would fix this problem. The repair service said error 21:10 would be between $600 and $1000 including the service call. I took it apart (with pictures of each step) Cleaned a huge

...500 carriage assembly it's vibrating the carriage aseembly is vibrating Get carriage assembly out from the service station area, remove right door, check right side pulley of carriage belt, ...